CentraLite 3-Series Water Sensors

From SecuriWiki
Jump to: navigation, search


Please follow the below instructions on how to add/remove the CentraLite 3-Series Water Sensors to Almond :

Water .png


Adding:


Tap on “Add Sensors-->Add” on Almond to keep it in pairing mode and search for the sensor.

Add 2.png

Now, hold down the reset button and re-insert the battery to do network RESET. Sensor would automatically start searching for the network to join and you would see the below information on the Almond LCD screen:

Add 3.png

Bulb is successfully added/paired with the Almond and could be controlled via Almond LCD Screen or Almond app.


Remove:


On your Almond LCD screen tap on “Add Sensor” icon and tap on “Remove” (Not on “Remove all sensors”), Almond would be in exclusion or removal mode as shown below in the picture:

Remove.jpg

Now, hold down the reset button and re-insert the battery to do network RESET. You would see the below message when the sensor is removed from the Almond.

Remove1.jpg

Sensor is successfully removed from the Almond.

OEM Link: https://www.centralite.com/products/