Difference between revisions of "Climax CO-8ZBS"

From SecuriWiki
Jump to: navigation, search
(Created page with "Category:Sensors <big><big>'''Please follow the below instructions on how to add/remove the Climax CO-8ZBS to Almond :'''</big></big> File:Climax CO-8ZBS.png|frameles...")
 
(No difference)

Latest revision as of 15:44, 8 August 2017


Please follow the below instructions on how to add/remove the Climax CO-8ZBS to Almond :

Climax CO-8ZBS.png


Adding:


Tap on “Add Sensors-->Add” on Almond to keep it in pairing mode and search for the sensor.

Add 2.png

Now, Hold the pairing button for 10 seconds to reset it. Device will automatically search for network and you would receive the following message on the Almond LCD screen:


Add 3.png

Sensor is successfully added/paired with the Almond and could be controlled via Almond LCD Screen or Almond app.


Remove:


On your Almond LCD screen tap on “Add Sensor” icon and tap on “Remove” (Not on “Remove all sensors”), Almond would be in exclusion or removal mode as shown below in the picture:

Remove.jpg

Now, Hold the pairing button for 10 seconds to reset it. You would see the below message when the sensor is removed from the Almond.

Remove1.jpg

Sensor is successfully removed from the Almond.

OEM Link: http://www.climax.com.tw/co-8zb-zb.php