Console port - Almond+ 2014

From SecuriWiki
Revision as of 10:35, 26 March 2014 by Lars (Talk | contribs)

Jump to: navigation, search

Content

he Almond+ has a console port in the shape of an RS232 serial port.


Pin-out

The pin-out is VCC, TX, GND, RX. Note: The VCC is not used when connecting a standard PC/Mac to the Almond+.

How to access

To access the console port, you'll have to remove the back of your Almond+. Four screws are hidden behind the rubber feet of the Almond+ and the rubber feet and the screws have to be removed to gain access to the console port.

FT232 USB to serial adapter

The Kickstarter beta and developer units were supplied with a FT232 USB to serial adapter and a three wire cable to connect it to the console port on the Almond+. The cable has to be attached as per the below picture or you you won't be able to access the Almond+ using it. FT232 USB serial adapter.jpg

Communications Parameters

  • 115,200 bps (baud)
  • 8 Bits
  • No Parity
  • 1 Stop bit