Difference between revisions of "GE/Wink Link bulbs"

From SecuriWiki
Jump to: navigation, search
(initial commit)
 
m (wording)
Line 5: Line 5:
 
A19 has been tested [http://forum.securifi.com/index.php/topic,1681.msg5668/topicseen.html#msg5668 working successfully] out of the box.  
 
A19 has been tested [http://forum.securifi.com/index.php/topic,1681.msg5668/topicseen.html#msg5668 working successfully] out of the box.  
  
If for some reason it becomes unresponsive to cloud or almond plus sensor commands follow these steps to resolve:
+
If for some reason the bulb becomes unresponsive to cloud or Almond+ sensor commands follow these steps to resolve:
 
# Delete unresponsive sensor using Almond+ touchscreen interface
 
# Delete unresponsive sensor using Almond+ touchscreen interface
 
# Repeat these steps five times.  
 
# Repeat these steps five times.  

Revision as of 20:07, 24 September 2014

The website can be found here, along with the Install Guide.

There are three models currently: A19, BR30, and PAR38

A19 has been tested working successfully out of the box.

If for some reason the bulb becomes unresponsive to cloud or Almond+ sensor commands follow these steps to resolve:

  1. Delete unresponsive sensor using Almond+ touchscreen interface
  2. Repeat these steps five times.
  1. Turn OFF light
  2. Wait 3 seconds
  3. Turn ON light
  4. Wait 3 seconds
  • The light will dim slightly and return to full brightness, when bulb is in pairing mode.
Return to the Almond+ touchscreen interface, and add sensor.