How to take screenshots of the TouchUI - Almond+ 2014

From SecuriWiki
Revision as of 22:24, 27 March 2014 by Patrick Wilson (Talk | contribs)

Jump to: navigation, search

Screenshots of the TouchUI (Almond+)

All Securifi Router products permit taking Screenshots on the TocuhUI. The instructions for generating these images varies depending on the model of Router that you are using. This article applies only to Almond+ Router:

Almondplus updated.jpg

In order to take a screenshot of the TouchUI on the router, you need to access the Router via telnet protocol. See: SSH Access to Almond+

Gain SSH access to the router. You can create the screenshot with the following command: screenshot /www/img.bmp

Almondplus-Create-Screenshot.png

This will save the Screenshot to your router at the filename you specify . All screenshots will be in BMP format, and should be stored in the /www folder so that you can retrieve the image using your Web Browser. To retrieve the image, simply point your Web browser to http://Almond+-IP/img.bmp. By default your Almond+ lives at 192.168.1.1. If you Almond is using this IP address, you can download the image by browsing to http://192.168.1.1/img.bmp. Save the image to your computer.

Open the image in your favourite image viewer. You should see something similar to the following:

Almondplus-Screenshot-example-image.png