How to upgrade the Firmware - Almond+ 2014

From SecuriWiki
Revision as of 13:53, 12 February 2015 by eldaria (Talk | contribs)

Jump to: navigation, search

The Almond+ has two different options when it comes to upgrading the firmware. We'll cover both methods here.

Contents

LCD UI

From firmware release R069 we've added an option to to upgrade the firmware via the LCD UI. This is very easy to do if you follow the steps below.

Start by tapping on the Settings app on the second screen of the LCD UI.

Settings firmware.png

Your Almond+ will automatically look for a new firmware and if one is available, you'll see an option to update the software as in the screenshot below.

Software update 1.png


The Almond+ will automatically download the firmware, as seen in the screenshots below.

Software update 2.png
Software update 3.png


Once the firmware has been downloaded, the Almond+ will automatically update itself and then reboot.

Software update 4.png


Once it has rebooted, the new software has been applied and you can go back and check the software version in the Settings app to verify that the update was successful.

Web UI

Using the web UI to update the firmware on the Almond+ is fairly straight forward. First download the latest firmware, (You can find it here: http://www.securifi.com/software-update). Next, open a web browser window and enter the IP address of your Almond+, by default this is 10.10.10.254. You can find the username and password in the Status app in the LCD UI, under Web Admin. You should now see the screen below, unless you've previously entered the web UI. Please locate the Software options, as highlighted in the image below.

Sw update 1.png

The next step involves locating the firmware file that you've downloaded by clicking on Chose file under the Flash new firmware image header. Browse to the firmware file and click Open (this might vary by your operating system). Note: Make sure Keep settings is ticked if you want to save your settings.

Sw update 2.png

Now click on Flash image as highlighted in the screenshot below.

Sw update 3.png

The firmware will be uploaded to your router and at this point you need to click on Proceed to flash the firmware of the Almond+.

Sw update 4.png

You'll be seeing the following screen while the new firmware is being updated. Your Almond+ will reboot and once it has rebooted, the new firmware will be installed.

Sw update 5.png