Difference between revisions of "Static IP address lease - Almond+ 2014"

From SecuriWiki
Jump to: navigation, search
Line 1: Line 1:
 
[[Category:Almond+ 2014]][[Category:Almond+ 2014 Web UI]]
 
[[Category:Almond+ 2014]][[Category:Almond+ 2014 Web UI]]
Certain devices on your network might require that you forward a port on your router to enable them to function properly. Examples of devices that might need this include older networked products, VoIP devices and IP Cameras.
+
DHCP (dynamically allocated IP address) have made it a lot easier to add networked devices to a router, however, there are times when you need to make sure that something on your network always uses the same IP address. Rather than setting a static IP address on the device itself, or in cases when this isn't possible, you can set up a static IP address lease on the Almond+ which insures that a specific device is always assigned the same IP address when it connects to your network.
  
To forward a port on the Almond+ you have to log in to the web admin UI of your Almond+. This is done by opening the IP address of your router in a web browser.  
+
To assign a static IP address lease on the Almond+ you have to log in to the web admin UI of your Almond+. This is done by opening the IP address of your router in a web browser.  
  
 
[[File:Almond plus status 4.png|480px|frameless]]
 
[[File:Almond plus status 4.png|480px|frameless]]
Line 13: Line 13:
  
 
[[File:Almondplus 2014 advanced web ui.png|600px|frameless]]
 
[[File:Almondplus 2014 advanced web ui.png|600px|frameless]]
 
Next, click on Forwarding.
 
 
[[File:Almondplus 2014 port forward.png|600px|frameless]]
 
 
At this point, you need to first fill in a name for the port forward. Name it something logical that makes sense to you. Next you need to select the protocol you need to use, if you don't know which it is, you can leave it at the default setting which is TCP+UDP. You need to know which port(s) to forward and you can normally get this from the user manual or support website of the device or application you want to forward ports to/from. Simply fill in the port in the External port text box. If you need a range of ports, this is done by putting a dash in-between the two numbers, for example 80-81. The Internal port is automatically filled in, as it should in general be the same as the external port. Finally you need to select the IP address of the device or computer you want to forward the port to. There's a drop down menu which provides a list of connected devices to chose from, or you can type it in manually. Don't forget to click on Add and then Save to finalize the port forward.
 

Revision as of 10:29, 14 July 2014

DHCP (dynamically allocated IP address) have made it a lot easier to add networked devices to a router, however, there are times when you need to make sure that something on your network always uses the same IP address. Rather than setting a static IP address on the device itself, or in cases when this isn't possible, you can set up a static IP address lease on the Almond+ which insures that a specific device is always assigned the same IP address when it connects to your network.

To assign a static IP address lease on the Almond+ you have to log in to the web admin UI of your Almond+. This is done by opening the IP address of your router in a web browser.

Almond plus status 4.png

You can find the IP address of your Almond+ by tapping on Status in the LCD UI and then Web Admin. This will not only display the IP address of your Almond+, but also the login credentials.

Almondplus 2014 main web ui.png

Once you've successfully logged in to the web UI of your Almond+ you need to click on the Advanced tab.

Almondplus 2014 advanced web ui.png