View source for Quirky PTRPR-WH01

[[Category:Sensors]]

<big><big>'''Please follow the below instructions on how to add/remove the Quirky PTRPR-WH01 to Almond :'''</big></big> 

[[File:Quirky PTRPR-WH01.jpg|frameless|350px]]


'''Adding:'''                                                                                                  


Tap on “'''Add Sensors-->Add'''” on Almond to keep it in pairing mode and search for the sensor.

[[File:Add 2.png|frameless|350px]]

To Pair the Sensor, please follow below instructions:
Open from the indent on the side of the main sensor.
Press and hold the black tamper button while taking out the battery.
Put the battery back in and let go of the tamper button.

While the sensor is adding/pairing to the Almond you would receive the below message on the Almond LCD Screen:



[[File:Add 3.png|frameless|350px]]

Bulb is successfully added/paired with the Almond and could be controlled via Almond LCD Screen or Almond app.


'''Remove:''' 


On your Almond LCD screen tap on “Add Sensor” icon and tap on “Remove” (Not on “Remove all sensors”), Almond would be in exclusion or removal mode as shown below in the picture:

[[File:remove.jpg|frameless|350px]]

Now, to Reset the Sensor, please follow below instructions:
Open from the indent on the side of the main sensor.
Press and hold the black tamper button while taking out the battery.
Put the battery back in and let go of the tamper button.

You would see the below message when the sensor is removed from the Almond.

[[File:remove1.jpg|frameless|350px]]

Sensor is successfully removed from the Almond.

OEM Link: http://nycesensors.com/products/