Quick start guide - Almond+ 2014

From SecuriWiki
Jump to: navigation, search


This section will cover how to get your Almond+ up and running, including how to connect it to the Almond cloud service and how to add sensors etc. We'll expand this section as we add new features and over time this will be transitioned to separate sections in the Wiki. For the time being we're keeping it on a single page to make it easier to find everything. This page will also contain the most up to date instructions.

Setup wizard

The first thing you’ll come across when you power on your Almond+ is the setup wizard. It’ll help you get connected to the Internet.

Tap on [Start wizard] to get started.

Error creating thumbnail: Unable to save thumbnail to destination

This screen simply informs you of where you can locate your stylus on the Almond+.

Error creating thumbnail: Unable to save thumbnail to destination

At this step you need to connect the cable from your Internet connection to the Almond+. Depending on the type of Internet connection you have, you'll then be prompted on how to continue.

Error creating thumbnail: Unable to save thumbnail to destination

DHCP

If you're using DHCP, the Almond+ will auto detect your settings and you should simply see a dialogue asking you to wait for the connection to be verified, followed by a screen that informs you that you're connected to the Internet.

Error creating thumbnail: Unable to save thumbnail to destination


Error creating thumbnail: Unable to save thumbnail to destination

PPPoE

If your Internet connection is using PPPoE, the Almond+ won't be able to auto detect your settings and you need to follow the following steps to get connected to the Internet.

Error creating thumbnail: Unable to save thumbnail to destination


Instead of being greeted by the Done screen, you'll see the following screen as the next step in the setup process.

Error creating thumbnail: Unable to save thumbnail to destination


At this point, select DSL Dialup and tap on Next to continue.

Error creating thumbnail: Unable to save thumbnail to destination


Now you need to fill in the username and password for the PPPoE connection. Tapping inside any of the two text boxes will bring up a virtual keyboard which allows you to edit the text. Once you're finished entering your username and password, tap on Next to continue.

Error creating thumbnail: Unable to save thumbnail to destination


The Almond+ will proceed to saving the settings which takes a few seconds.

Error creating thumbnail: Unable to save thumbnail to destination


Select PPPoE DSL and tap next to finalize the setup.

Error creating thumbnail: Unable to save thumbnail to destination


If the settings were correct and the Almond+ can connect to the Internet through your xDSL modem you should see the screen below and you're ready to continue to the next step of the setup.

Error creating thumbnail: Unable to save thumbnail to destination


Link to Cloud

The next step involves linking your Almond+ to a new Almond account so you can use the cloud service for remote access to your sensors. Simply tap on [Almond Account] and you’ll be greeted by the following screen.

Error creating thumbnail: Unable to save thumbnail to destination


To connect your Almond+ to the Almond cloud service, you first need to create an account. Please follow the steps described below to register your account. Open a web browser and go to https://connect.securifi.com/ and you should see the following screen. Please click on Sign up and proceed to the next step.

Error creating thumbnail: Unable to save thumbnail to destination


At this point, provide an email address and a password (which has to be to confirmed) for your Almond account. Don’t forget to read and agree to the terms and conditions, then click on Signup. Once you've signed up, you'll receive an activation email from welcome@securifi.com, make sure it hasn’t ended up in your spam filter/folder. Please click on the activation link inside the email.

Error creating thumbnail: Unable to save thumbnail to destination


Error creating thumbnail: Unable to save thumbnail to destination


Error creating thumbnail: Unable to save thumbnail to destination

Once you’ve logged in, you should see the following screen.

Error creating thumbnail: Unable to save thumbnail to destination


Error creating thumbnail: Unable to save thumbnail to destination

You’re now ready to continue the process of linking your Almond+ to the Almond cloud service. Click on the blue icon as per the instructions in step 6 on the LCD screen of your Almond+. This will take you to the Link Almond screen which is asking you to enter a code.

Error creating thumbnail: Unable to save thumbnail to destination


Tap next in the LCD UI of your Almond+ and a cod will be auto generated as shown below. The code is case sensitive, unique and can only be used once. You have a two minute time window to enter this code into the field on the webpage. If the time runs out, you can get a new code and start over.

Error creating thumbnail: Unable to save thumbnail to destination


Error creating thumbnail: Unable to save thumbnail to destination


This code has to be entered into the code box on the webpage as shown below.

Error creating thumbnail: Unable to save thumbnail to destination


If the linking process was successful, you should see the following message on the webpage.

Error creating thumbnail: Unable to save thumbnail to destination

The Almond LCD will show:

Error creating thumbnail: Unable to save thumbnail to destination


If the linking failed for some reason, you’ll see something like the following message.

Error creating thumbnail: Unable to save thumbnail to destination


After a successful linking, click on Done and you should see the following screen in your web browser.

Error creating thumbnail: Unable to save thumbnail to destination


To finalize the setup on your Almond+, simply tap anywhere on the screen and you’ll exit the wizard and enter the main LCD UI of your Almond+.

Add Sensors

It’s now time to start adding sensors to your Almond+. To do this, tap on the Add Sensor icon on the LCD UI.

Error creating thumbnail: Unable to save thumbnail to destination


From here you can start adding your sensors. Simply tap on the Add button.

Error creating thumbnail: Unable to save thumbnail to destination


At this point, you need to start the process of adding your sensor or device. Please read the instructions that came with your sensor or device on how to add them to a network. There’s usually a button that should be pressed in a specific way (once, three times quickly, press and hold for 3 seconds, etc.) to start the adding process.

Error creating thumbnail: Unable to save thumbnail to destination


Once the sensor or device has been detect by the Almond+, you can change the default name and location by tapping in either text box. A virtual keyboard will appear and you can change it to something that makes it easy to locate. This can also be changed later by editing the sensor in the Connected Sensors app, via the local web UI, the Almond cloud or in the mobile app. When finished, tap on [Done!] to save the settings.

Error creating thumbnail: Unable to save thumbnail to destination


Remove a sensor

If for some reason you want to remove a sensor or device, simply tap on the Remove a Sensor button and then follow the sensor or device manufacturer’s instructions on how to remove a sensors. This usually involves either pressing the button on the sensor or device shortly, several times quickly, or holding it pressed down for about 5-10 seconds.

Error creating thumbnail: Unable to save thumbnail to destination

Error creating thumbnail: Unable to save thumbnail to destination


Additionally you can remove all sensors connected to your Almond+ by selecting Remove all Sensors. This will remove all connected sensors and you will have to manually reset them afterwards to be able to add them again.
Warning: Doing this will forcefully remove all connected sensors and it’s not recommended to do during normal operation. Remove all Sensors should only be used after you’ve removed all your sensors and device to purge any potential residual sensor data.

Error creating thumbnail: Unable to save thumbnail to destination

Controlling your sensors and devices

Although the best way to keep an eye on all your sensors and devices are via the Almond cloud service (or the upcoming offline option), it’s possible to control and monitor your sensors and devices directly from the Almond+ LCD UI via the Connected Home app. Start it by tapping on the corresponding icon on the LCD UI.

Error creating thumbnail: Unable to save thumbnail to destination


In this example we have a binary power switch and a door/window sensor connected to the Almond+.
Note: This is not the final UI for the Connected Home app but serves as an easy means of testing your sensors after you've associated them with your Almond+.

Error creating thumbnail: Unable to save thumbnail to destination


The binary switch can be switched on or off from the LCD UI and models with power metering functionality should also display it here.

Error creating thumbnail: Unable to save thumbnail to destination


The door/window sensor in this example simply displays a true/false statement. This will be changed to open/closed in a future firmware update.
Note:The ZigBee door/window sensors that shipped with the $499 pledges display open/close. The typo will again get fixed in a future firmware update.


Error creating thumbnail: Unable to save thumbnail to destination


Below is an example of the controls of a more complex device, in this case a Radio Thermostat.

Error creating thumbnail: Unable to save thumbnail to destination