Difference between revisions of "WeMo Smart LED bulb"

From SecuriWiki
Jump to: navigation, search
m
 
(One intermediate revision by one user not shown)
Line 1: Line 1:
−
To add/associate a WeMo Smart LED bulb to your Almond, simply plug it in and it'll automatically go into inclusion/add mode. On the Almond, tap on Add Sensor, then Add and the bulb will be added to your Almond. Once it has been added, you can re-name it and change its locations.
+
[[Category:Sensors]]
  
−
To remove/unassociate a WeMo Smart LED bulb from your Almond, simply go into Connected Sensors, tap on the bulb, tap on Edit and then Remove. Confirm that you want to remove the bulb by tapping on Yes.
+
<big><big>'''Please follow the below instructions on how to add/remove the WeMo Smart LED bulb to Almond :'''</big></big>
−
This will remove and reset the bulb so it's ready to be paired again.
+
 
 +
[[File:Belkin Wemo.jpg|frameless|350px]]
 +
 
 +
 
 +
'''Adding:'''                                                                                                 
 +
 
 +
 
 +
Tap on “'''Add Sensors-->Add'''” on Almond to keep it in pairing mode and search for the sensor.
 +
 
 +
[[File:Add 2.png|frameless|350px]]
 +
 
 +
Now, Switch ON and OFF bulb with 5 sec of delay for 5 times to do Network RESET or go to Device interface In “Connected Sensors” app of ALMOND and Click on REMOVE (Note: Please ensure BULB is ON). After the Reset the bulb would be automatically paired with the Almond, see below image for pairing information:
 +
 
 +
[[File:Add 3.png|frameless|350px]]
 +
 
 +
Bulb is successfully added/paired with the Almond and could be controlled via Almond LCD Screen or Almond app.
 +
 
 +
 
 +
'''Remove:'''
 +
 
 +
 
 +
On your Almond LCD screen tap on “Add Sensor” icon and tap on “Remove” (Not on “Remove all sensors”), Almond would be in exclusion or removal mode as shown below in the picture:
 +
 
 +
[[File:remove.jpg|frameless|350px]]
 +
 
 +
Now, Switch ON and OFF bulb with 5 sec of delay for 5 times to do Network RESET or go to Device interface in “Connected Sensors” app of ALMOND and Click on REMOVE (Note: Please ensure BULB is ON). You would see the below message when the sensor is removed from the Almond.
 +
 
 +
[[File:remove1.jpg|frameless|350px]]
 +
 
 +
Bulb is successfully removed from the Almond.
 +
 
 +
OEM Link: http://www.belkin.com/us/p/P-F5Z0489/

Latest revision as of 17:55, 27 July 2017


Please follow the below instructions on how to add/remove the WeMo Smart LED bulb to Almond :

Belkin Wemo.jpg


Adding:


Tap on “Add Sensors-->Add” on Almond to keep it in pairing mode and search for the sensor.

Add 2.png

Now, Switch ON and OFF bulb with 5 sec of delay for 5 times to do Network RESET or go to Device interface In “Connected Sensors” app of ALMOND and Click on REMOVE (Note: Please ensure BULB is ON). After the Reset the bulb would be automatically paired with the Almond, see below image for pairing information:

Add 3.png

Bulb is successfully added/paired with the Almond and could be controlled via Almond LCD Screen or Almond app.


Remove:


On your Almond LCD screen tap on “Add Sensor” icon and tap on “Remove” (Not on “Remove all sensors”), Almond would be in exclusion or removal mode as shown below in the picture:

Remove.jpg

Now, Switch ON and OFF bulb with 5 sec of delay for 5 times to do Network RESET or go to Device interface in “Connected Sensors” app of ALMOND and Click on REMOVE (Note: Please ensure BULB is ON). You would see the below message when the sensor is removed from the Almond.

Remove1.jpg

Bulb is successfully removed from the Almond.

OEM Link: http://www.belkin.com/us/p/P-F5Z0489/

Retrieved from "https://wiki.securifi.com/index.php?title=WeMo_Smart_LED_bulb&oldid=1378"