Difference between revisions of "NYCE NCZ-3041"

From SecuriWiki
Jump to: navigation, search
(Created page with "Category:Sensors <big><big>'''Please follow the below instructions on how to add/remove the NYCE NCZ-3041 to Almond :'''</big></big> File:Nyce NYCE NCZ-3041.jpg|frame...")
 
(No difference)

Latest revision as of 15:09, 8 August 2017


Please follow the below instructions on how to add/remove the NYCE NCZ-3041 to Almond :

Nyce NYCE NCZ-3041.jpg


Adding:


Tap on “Add Sensors-->Add” on Almond to keep it in pairing mode and search for the sensor.

Add 2.png

Now, press the button on the sensor for 10 times to reset. The sensor automatically starts searching for the network to join and you would receive the below message on the Almond LCD screen:

Add 3.png

Bulb is successfully added/paired with the Almond and could be controlled via Almond LCD Screen or Almond app.


Remove:


On your Almond LCD screen tap on “Add Sensor” icon and tap on “Remove” (Not on “Remove all sensors”), Almond would be in exclusion or removal mode as shown below in the picture:

Remove.jpg

Now, press the button on the sensor for 10 times to reset. You would see the below message when the sensor is removed from the Almond.

Remove1.jpg

Sensor is successfully removed from the Almond.

OEM Link: http://nycesensors.com/products/