GE/Wink Link bulbs

From SecuriWiki
Revision as of 03:49, 25 September 2014 by Lars (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The website can be found here, along with the Install Guide.

There are three models currently: A19, BR30, and PAR38

A19 has been tested working successfully out of the box.

If for some reason the bulb becomes unresponsive to cloud or Almond+ sensor commands follow these steps to resolve:

  1. Delete unresponsive sensor using Almond+ touchscreen interface
  2. Repeat these steps five times.
  1. Turn OFF light
  2. Wait 3 seconds
  3. Turn ON light
  4. Wait 3 seconds
  • The light will dim slightly and return to full brightness, when bulb is in pairing mode.
Return to the Almond+ touchscreen interface, and add sensor.