Difference between revisions of "Nietzsche Enterprise WZB- SPM05"

From SecuriWiki
Jump to: navigation, search
(Created page with "<big><big>'''Please follow the below instructions on how to add/remove the Osram to Almond +:'''</big></big> 350px '''Adding:''' ...")
(No difference)

Revision as of 13:41, 18 July 2017

Please follow the below instructions on how to add/remove the Osram to Almond +:

Climax Motion.jpg

Adding:

Tap on “Add Sensors-->Add” on Almond to keep it in pairing mode and search for the sensor.

Add 2.png

Now, on the Sensor, Press S1 button for 5 seconds to RESET. After the reset sensor automatically searches for the network (Almond) and starts connecting/pairing with the Almond, please see below image for pairing information:

Add 3.png

Sensor is successfully added/paired with the Almond and could be controlled via Almond LCD Screen or Almond app.


Remove:


On your Almond LCD screen tap on “Add Sensor” icon and tap on “Remove” (Not on “Remove all sensors”), Almond would be in exclusion or removal mode as shown below in the picture:

Remove.jpg

Now, on the Sensor, Press S1 button for 5 seconds to RESET. You would see the below message when the sensor is removed from the Almond.

Remove1.jpg

Sensor is successfully removed from the Almond.