Osram Sylvania Ultra iQ

From SecuriWiki
Revision as of 22:39, 15 July 2017 by Ashok (Talk | contribs)

Jump to: navigation, search


Please follow the below instructions on how to add/remove the Osram Sylvania Ultra iQ to Almond +:

Ultra-iQ.pnp.jpg


Adding:


Tap on “Add Sensors-->Add” on Almond to keep it in pairing mode and search for the sensor.

Add 2.png

Now, Turn ON and OFF bulb with 5 sec of delay for 5 times to do Network RESET and after the Reset the bulb would be automatically paired with the Almond, see below image for pairing information:

Add 3.png

Bulb is successfully added/paired with the Almond and could be controlled via Almond LCD Screen or Almond app.


Remove:


On your Almond LCD screen tap on “Add Sensor” icon and tap on “Remove” (Not on “Remove all sensors”), Almond would be in exclusion or removal mode as shown below in the picture:

Remove.jpg

Now, Switch ON and OFF bulb with 5 sec of delay for 5 times to do Network RESET (Note: Please ensure BULB is ON), which would remove the bulb from Almond's network.

Remove1.jpg

Bulb is successfully removed from the Almond.


http://assets.sylvania.com/assets/Documents/RETRO059.35d42b0b-c024-4d44-b26e-92b990e58e4f.pdf

Please note that at the moment, this bulb is only available from Lowe's in the US - http://www.lowes.com/pd_484719-3-78960_4294713508