Difference between revisions of "SmartSense Moisture"

From SecuriWiki
Jump to: navigation, search
(Created page with "Category:Sensors <big><big>'''Please follow the below instructions on how to Add/Remove SmartThings SmartSense Multi Sensor ZigBee Contact Switch from Almond: :'''</big><...")
(No difference)

Revision as of 15:51, 18 July 2017


Please follow the below instructions on how to Add/Remove SmartThings SmartSense Multi Sensor ZigBee Contact Switch from Almond:

Smart Things.png


Adding:


Tap on “Add Sensors-->Add” on Almond to keep it in pairing mode and search for the sensor.

Add 2.png

Press the Connect button once to start searching for network. Your sensor would start connecting to the Almond, please see the image below for pairing information:

Add 3.png

Sensor is successfully added/paired with the Almond and could be controlled via Almond LCD Screen or Almond app.


Remove:


On your Almond LCD screen tap on “Add Sensor” icon and tap on “Remove” (Not on “Remove all sensors”), Almond would be in exclusion or removal mode as shown below in the picture:

Remove.jpg

Now, Hold the Connect button for six seconds or until the LED light turns off to RESET. You would see the below message when the sensor is removed from the Almond.

Remove1.jpg

Sensor is successfully removed from the Almond.

https://support.smartthings.com/hc/en-us/articles/205382174-Samsung-SmartThings-Multipurpose-Sensor-2015-model-