Status screen LCD UI - Almond+ 2014

From SecuriWiki
Revision as of 09:19, 16 April 2014 by Lars (Talk | contribs)

Jump to: navigation, search

The Status screen provides a lot of useful information about the status of your Almond+ and the network in general.

Basic

The Basic status tab shows if your Almond+ is connected to the internet, as well as how many connected users (read computers, tablets, smartphones etc.) and how many connected ZigBee and Z-Wave devices your Almond+ has. You can also find the IP address of your Almond+ here.
Note: In firmware R054, the ZigBee and Z-Wave device lists are static and doesn't change. This will be fixed in R055.
Almond plus status 1.png

MAC

The MAC tab screen simply displays the MAC address for the WAN, LAN and two Wi-Fi networks of your Almond+.
Almond plus status 2.png

Network

The Network tab provides the IP address wired devices that are connected directly to a network port of your Almond+. If you use a hub or a switch, the information here won't be displated correctly. You can also see if there's something connected to a specific port and if it's working by the green tick mark versus the red cross mark.
Almond plus status 3.png

Web Admin

The Web Admin tab provides details on how to access the web admin UI of your Almond+.
Note:An option to obscure the password should be added in a future firmware update.
Almond plus status 4.png